EmCORE-a5364
AMD® Geode™ LX800 3.5" Compact Board
Key Features
-
Fanless Design
-
Soldered Onboard AMD® Geode™ LX800 500MHz Processor
-
Soldered Onboard DDR 256MB Memory
-
18/24-bit TTL, 18-bit LVDS, and Analog RGB
-
Support Analog RGB Output, LVDS and TTL Interface for LCD
-
Multi-expansion (4 x USB, 4 x Serial Ports, 1 x PATA,1 x CF Socket, PC/104)
| System | |
| CPU | AMD® Geode LX800 500MHz processor |
| Memory | Soldered onboard 256MB DDR SDRAM |
| Chipset | AMD® LX800 + CS5536 |
| BIOS | Phoenix-Award PnP Flash BIOS |
| Storage | 1 x Ultra ATA, support 2 IDE devices 1 x CompactFlash Type II Socket 1 x Floppy disk drive share with parallel port |
| Watchdog Timer | 1~255 levels reset |
| I/O Interface | |
| Serial Port | 4 x COM ports (3 x RS-232, 1 x RS-232/422/485 selectable) |
| Parallel Port | SPP/EPP/ECP mode selectable |
| USB Port | 4 x USB 2.0 ports |
| KB/MS | 2 x 5-pin headers for PS/2 interface Keyboard and Mouse |
| Digital I/O | 8-bit Digital Input/Output |
| Expansion Bus | PC/104 interface |
| Ethernet | |
| Chipset | 2 x Realtek RTL8100CL PCI 10/100Base-T Ethernet controllers |
| Audio | |
| CODEC/Interface | Realtek ALC203 AC97 Audio Codec, Mic-in/Line-in/Line-out |
| Display | |
| Graphics Chipset | AMD® Geode LX800 integrated VGA controller with 2D engine (shared memory Max. 64MB) |
| Graphics Interface | Analog RGB: 1920 x 1440 @85Hz LCD: 18/24-bit TTL up to 1600 x 1200 (60Hz) 18-bit LVDS up to 1600 x 1200 (60Hz) |
| Mechanical & Environmental | |
| Power Requirement | Big 4P AT power connector |
| Power Consumption | 1.1A/5V |
| Operating Temp. | 0 ~ 60°C (32 ~ 140°F) |
| Operating Humidity | 0 ~ 95% (non-condensing) |
| Dimension (L x W) | 146 x 102 mm (5.7" x 4") |
| Ordering Information | |
| EmCORE-a5364VL2 | AMD® Geode™ LX800 3.5" compact board |
| CBK-14-5364-00 | Cable kit 1 x Audio cable 2 x USB cables 4 x COM port cables 1 x LPT to FDD cable 1 x IDE cable 1 x LPT cable 2 x LAN cables 1 x VGA cable 1 x KB & MS cable |
Please complete information below and we will contact you shortly.
Note. Fields marked with a star ( * ) are required.
