EmETXe-i67M1/i65M1
2nd Generation Intel® Core™ i7/ Celeron® Processor COM Express® Basic Type 2 CPU Module
Key Features
-
Soldered onboard 2nd Generation Intel® Core™ i7-i2610UE/Celeron® 827E
-
Integrated Gigabit Ethernet
-
Dual Channels 24-bit LVDS, Analog RGB, and DDI Port
-
Dual Independent Displays supported
-
RAID 0, 1, 5, 10 supported (for EmETXe-i67M1-2610UE only)
-
Extended Operating Temp.: -20 ~ 70°C
| System | |
| CPU | Soldered onboard 2nd Generation Intel® Core™ i7-2610UE dual-core 1.5GHz or Celeron® 827E 1.4GHz |
| Memory | 2 x DDR3 SO-DIMM sockets, supporting SDRAM up to 8GB |
| Chipset | Intel® PCH QM67 for EmETXe-i67M1-2610UE Intel® PCH HM65 for EmETXe-i65M1-827E |
| BIOS | AMI UEFI BIOS |
| Watchdog Timer | 1~255 levels reset |
| I/O Interface | |
| USB Port | 8 x USB 2.0 ports |
| Digital I/O | 8-bit programmable digital input/output |
| Expansion Bus | 1 x PCIe x16 lanes 5 x PCIe x1 lanes 4 x PCI masters LPC (Low Pin Count) interface |
| Storage | 4 x Serial ATA ports: - 2 ports with 600MB/s HDD transfer rate - 2 ports with 300MB/s HDD transfer rate |
| Ethernet Chipset | 1 x Intel® 82583V PCIe GbE Controller |
| Audio | HD Audio link |
| Display | |
| Graphic Chipset | Integrated Intel® HD Graphics 3000 |
| Graphic Interface | Analog RGB that supports resolution up to 2048 x 1536 @60Hz LCD: Dual Channels 24-bit LVDS, resolution up to 1920 x 1600 DDI port connector on CPU module supported Dual independent displays supported |
| Mechanical & Environmental | |
| Power Requirement | DC 12V, 5VSB |
| Power Consumption | [email protected] with i7-2610UE (Typical, with PBE-1700) |
| Operating Temp. | -20 ~ 70ºC (-4 ~ 158ºF) |
| Operating Humidity | 10 ~ 95% @ 70ºC (non-condensing) |
| Dimension (L x W) | 125 x 95 mm (4.9" x 3.7") |
| Ordering Information | |
| EmETXe-i67M1-2610UE | 2nd Generation Intel® Core™ i7-2610UE/ QM67 COM Express® CPU module |
| EmETXe-i65M1-827E | Intel® Celeron® 827E/HM65 COM Express® CPU module |
| Optional Accessories | |
| FCDB-1424 | DisplayPort daughter board |
| HS-67M1-F2 | Heat spreader 125x95x11mm |
| HS-0000-W4 | Universal evaluation heat sink kit with thermal pad 125x95x22mm, only used on a flat-type heat spreader |
| PBE-1700-W R1.3 | COM Express® Type 2 evaluation carrier board with Super IO W83627 in ATX form factor |
| CBK-04-1700-00 | Cable Kit 1 x SATA cable 1 x Serial port cable 1 x FDD cable 1 x IDE cable |
Please complete information below and we will contact you shortly.
Note. Fields marked with a star ( * ) are required.Recommend the Page to your friend or yourself, please fill in this table.
